PHR Short Stud and Nut Kit for Turbo Manifolds
The PHR Short Stud and Nut Kit uses shorter studs than the factory twin turbo studs and the nuts are flanged with a smaller diameter flange. These are often used where clearance for manifold runners are very tight.
Each Kit Includes:
- (12) M10x1.25 studs
- (12) M10x1.25 nuts
PLEASE NOTE: We designed our Short Stud and Nut Kit to be used with our own 0.47" thick PHR Header Flange for 2JZ-GTE or header flanges that are similar in width. Each stud will protrude approximately 1" from the head once it is threaded in and approximately 13/16" of that will be threaded.