( ALL MODULAR MOUNTS SUPPORT ALL ECUs LISTED! THE DROP-DOWN MENU IS ONLY TO ADD TITANIUM HARDWARE FOR THAT SPECIFIC ECU OR MODULE and SELECT RHD or LHD)
The Supra community has always struggled to find a quick and efficient solution to ECU mounting in the chassis.
We are offering not just a raw template for you, but a completely finished product with pre-existing layouts for the following modules (LISTED BELOW)
These modules will have direct mount points (already threaded). Simply bolt your choice of gear to the allocated space. You will have to perform zero modifications
of your own, simply place and thread the bolt into the corresponding holes.The Mod Mount will also include 6061-t6 standoffs and a footrest cover to replace the
stock variant. We have also made a special bracket to retain the stock ABS unit if desired. The footrest cover will retain the OEM push rivet tabs for the interior
carpet, as well as the alignment pin for the door sill cover. The Modular Mount System will include an elevated access point and mount for any PNP harness adaptors
such as Haltech, AEM, Boomslang, etc. This makes it extremely easy to access the 10mm bolt and simply remove your EFI harness to remove the board entirely; making
servicing or switching modules incredibly easy.
We have also provided many DTM clip sites. These make cable management a breeze. The board will come standard with (2) Clips. Additional clips can be added HERE
The frame will come standard with Ti hardware for the standoffs.
Optional Ti for your specific module is in the drop-down menu (Please select prior to adding to cart)
The Mod Mount will have two separate positions for POWER & GROUND mounting posts ADD THESE TO YOU CART (HERE)
All kits will come standard with a roll of VHB double-sided tape, for things that you may want to add that are not on our list. If an ECU is marked "VHB" This is an
ECU that does not have direct mount threads on the mount, but will instead utilize the VHB provided. This is also subject to change.
Depending on your selection of modules, you will still retain the ability to utilize any of the unused pre-defined threaded holes that range from the following
4MM/5MM/6MM Diameter and therefore should have no problems allocating any other modules of your liking.
Direct Fit Module List Includes the Following:
SERIES 1 (VHB)
SERIES 2 (VHB)
PNP CLASSIC +
CAN to USB PORT (VHB)
NEXUS R5 (INVERTED OPTIONAL)
ELITE PNP HARNESS
I/O EXPANDER MODULE
Pro EFI 128 (VHB)
LINK ENGINE MANAGEMENT:
STOCK ECU HOUSING PNP
RAZOR PDM (VHB)
PDM 15/30 (11/6/22)
PDM 16/32 (11/6/22)
Supra S7 Plus
Supra S7-i vvti and non
|None or Haltech Elite 2000/2500 or NEXUS or TMS4 or WB1/WB2 or 4 Port CAN HUB or Haltech Elite 2000/2500 - TMS4 or Haltech Elite 2000/2500 - WB1/WB2 or Haltech Elite 2000/2500 - 4 Port CAN HUB or Haltech Elite 2000/2500 - 4 Port CAN HUB - TMS4 or Haltech Elite 2000/2500 - 4 Port CAN HUB - WB1/WB2 or Haltech Elite 2000/2500 - TMS4- WB1/WB2 or NEXUS - 4 Port CAN HUB or NEXUS - TMS4 or NEXUS - 4 Port CAN HUB - TMS4 or PD16 or Haltech Elite 2000/2500 - PD16 or Haltech Elite 2000/2500 - PD16 - WB1/WB2 or Haltech Elite 2000/2500 - PD16 - WB1/ 4 Port CAN or Haltech Elite 2000/2500 - PD16 - 4 Port CAN HUB or Elite 2000/2500 - PD16- CAN HUB - TMS4- WB1/2 or Elite 2000/2500 - TMS4- PD16 or NEXUS - PD16 or NEXUS PD16 - TMS4 or NEXUS - TMS4 - CAN HUB or M150/M130 or ECU Master Classic or ECU Master Black